Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.
RELATED INFORMATION:
|
MATERIAL: |
Travertine |
COLOR RANGE: |
Black |
Availability |
Type |
Nominal Size |
Thickness |
Finish |
Limited Stock |
Slab |
Varies by lot, see stock. |
2CM |
Polished + Filled |
STOCK - Items are generally in stock in select sizes. Inventory levels vary.
LIMITED STOCK - Boutique items. Available in smaller quantities due to material demand and availability.
QUICK SHIP - Items are available in quantities up to 2,000 SF and are available to ship in 7 business days or less.
SPECIAL ORDER - Items are not in stock. Lead times vary. Ask your sales consultant for details.
|
Refer to Inventory Overview PDF for "Availability" descriptions.
Exterior Cladding |
Exterior Pavers |
Interior Walls |
Interior Floors |
Kitchen Countertops |
Other Countertops |
Wet Areas |
Traffic |
No |
No |
Yes |
Yes |
No |
Yes |
Yes |
Heavy Commercial |
Refer to Applications Guide PDF for descriptions and most commonly used materials by application.
Pre-Grouting Protection |
Initial Cleaning |
Protection Natural Effect |
Protection Color Enhancing |
Standard Maintenance |
Special Maintenance |
Fila PRW200 |
Fila PS/87 |
Fila Fob |
Fila Stone Plus |
Fila Cleaner |
NA |
Refer to Care + Maintenance PDF for descriptions and cleaning instructions.
Black Travertine slabs have a resin and mesh backing and therefore require an epoxy setting adhesive such as Latapoxy from Laticrete or similar. This is a fragile material. Use an experienced fabricator familiar with working and repairing these materials. Waste materials should be factored in to fabrication as repairs and reinforcements will likely need to be made. Complex cut to size projects are not advised. Travertine is a porous material with naturally-occuring holes that may remain unfilled or be factory-filled with resin or cement. Do not use resin-filled materials outside, as the resin will discolor over time. See the Applications Guide PDF for alternatives. |
|
Rating |
ABRASION RESISTANCE (The ability of a material to resist surface wear.) |
Low |
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications. |
Rating |
ABSORPTION (The relative porosity of a material.) |
High |
This material has a medium to high absorption rate. Always seal this material prior to use. Properly seal the material prior to grouting by applying several coats of sealant or until water beads up on the surface. Use Fila PRW200 to avoid staining from grout residues and specify a grout color that is similar to the color of the stone to avoid color bleeding into the material. Use low moisture setting materials. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain. |
Rating |
ACID SENSITIVITY (The likelihood of a material reacting to acidic foods or liquids.) |
High |
This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material. |
Rating |
FREEZE-THAW (The ability of a material to withstand freeze-thaw cycles in exterior applications.) |
Not Recommended |
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications. |
Refer to Technical Performance Specs PDF for descriptions of criteria.
|