Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.
RELATED INFORMATION:
|
| MATERIAL: |
Quartzite |
| COLOR RANGE: |
White |
|
| Availability |
Type |
Size |
Thickness |
Finish |
| Stock |
Slab |
Varies by lot, see stock. |
2CM |
Polished |
| Stock |
Slab |
Varies by lot, see stock. |
3CM |
Polished |
Refer to Inventory Overview PDF for "Availability" descriptions.
|
| Exterior Cladding |
Exterior Pavers |
Interior Walls |
Interior Floors |
Kitchen Countertops |
Other Countertops |
Wet Areas |
Traffic |
| X |
X |
X |
X |
X |
X |
X |
Heavy Commercial |
Refer to Applications Guide PDF for descriptions and most commonly used materials by application.
|
| Pre-Grouting Protection |
Initial Cleaning |
Protection
Natural Effect |
Protection
Color Enhancing |
Standard
Maintenance |
Special
Maintenance |
| Fila PRW200 |
Fila PS/87 |
Fila W68 |
NA |
Fila Cleaner |
NA |
Refer to Care + Maintenance PDF for descriptions and cleaning instructions.
|
| Due to the incredibly High Abrasion Resistance of quartzite, it can be difficult to quarry and fabricate. This affects availability, fabrication lead times and cost. Most quartzite has naturally-occurring cracks and fissures. Expect to see factory repaired (resin, etc.) cracks and fissures. |
| |
| Rating |
ABRASION RESISTANCE
(The ability of a material to resist surface wear.) |
| High |
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc. |
| Rating |
ABSORPTION
(The relative porosity of a material.) |
| Moderate |
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain. |
| Rating |
ACID SENSITIVITY
(The likelihood of a material reacting to acidic foods or liquids.) |
| Minimal |
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes. |
| Rating |
FREEZE-THAW
(The ability of a material to withstand freeze-thaw cycles in exterior applications.) |
| All Exteriors |
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use MIA standards for thickness in exteriors and consult an engineer regarding fastening systems and thickness/tensile strength required for your project. This material will patina. |
Refer to Technical Performance Specs PDF for descriptions of criteria.
|
