Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.
RELATED INFORMATION:
|
MATERIAL: |
Marble |
COLOR RANGE: |
White |
Availability |
Type |
Nominal Size |
Thickness |
Finish |
Stock |
Slab |
Varies by lot, see stock. |
2CM |
Honed |
Stock |
Slab |
Varies by lot, see stock. |
3CM |
Honed |
STOCK - Items are generally in stock in select sizes. Inventory levels vary.
LIMITED STOCK - Boutique items. Available in smaller quantities due to material demand and availability.
QUICK SHIP - Items are available in quantities up to 2,000 SF and are available to ship in 7 business days or less.
SPECIAL ORDER - Items are not in stock. Lead times vary. Ask your sales consultant for details.
|
Refer to Inventory Overview PDF for "Availability" descriptions.
Exterior Cladding |
Exterior Pavers |
Interior Walls |
Interior Floors |
Kitchen Countertops |
Other Countertops |
Wet Areas |
Traffic |
Yes |
No |
Yes |
Yes |
Yes |
Yes |
Yes |
Heavy Commercial |
Refer to Applications Guide PDF for descriptions and most commonly used materials by application.
Pre-Grouting Protection |
Initial Cleaning |
Protection Natural Effect |
Protection Color Enhancing |
Standard Maintenance |
Special Maintenance |
Fila PRW200 |
Fila Cleaner |
Fila Fob |
NA |
Fila Cleaner |
NA |
Refer to Care + Maintenance PDF for descriptions and cleaning instructions.
This material is quarried in the United States and may qualify for LEED MR Credits 5.1 and 5.2. Most marble has naturally occurring cracks and fissures. Expect to see factory repairs. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer. |
|
Rating |
ABRASION RESISTANCE (The ability of a material to resist surface wear.) |
Low |
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications. |
Rating |
ABSORPTION (The relative porosity of a material.) |
Moderate |
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain. |
Rating |
ACID SENSITIVITY (The likelihood of a material reacting to acidic foods or liquids.) |
Moderate |
This material is moderately sensitive to acids. Generally, acid etching will be less visible on lighter stones and honed surfaces. The finish will patina over time. If acid etching is a concern, select a minimally sensitive material. |
Rating |
FREEZE-THAW (The ability of a material to withstand freeze-thaw cycles in exterior applications.) |
All Exteriors |
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use MIA standards for thickness in exteriors and consult an engineer regarding fastening systems and thickness/tensile strength required for your project. This material will patina. |
Refer to Technical Performance Specs PDF for descriptions of criteria.
|