Zebra Gray
FINISH: Honed

Create Pdf
Zebra Gray Honed

Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.

RELATED INFORMATION:

See slabs
Material Considerations
Explains what to expect with materials. IF YOU READ NOTHING ELSE, READ THIS.
Inventory Overview
Defines material options and availability.
Applications Guide
Lists the materials most commonly used in each application.
Care + Maintenance
Gives guidelines for ensuring that materials last over time.
Technical Performance Specs
Defines criteria we use to rate the performance of our materials.
MATERIAL: Limestone
COLOR RANGE: Gray
Inventory
Availability Type Nominal Size Thickness Finish
Limited Stock Tile 8"x24" 3/8" Honed
Stock Tile 12"x24" 3/8" Honed
Stock Slab Varies by lot, see stock. 2CM Honed

STOCK - Items are generally in stock in select sizes. Inventory levels vary.
LIMITED STOCK - Boutique items. Available in smaller quantities due to material demand and availability.
QUICK SHIP - Items are available in quantities up to 2,000 SF and are available to ship in 7 business days or less.
SPECIAL ORDER - Items are not in stock. Lead time vary. Ask your sales consultant for details.

Refer to Inventory Overview PDF for "Availability" descriptions.

Applications
Exterior Cladding Exterior Pavers Interior Walls Interior Floors Kitchen Countertops Other Countertops Wet Areas Traffic
Yes Yes Yes Yes No Yes Yes Heavy Commercial

Refer to Applications Guide PDF for descriptions and most commonly used materials by application.

Care + Maintenance
Pre-Grouting Protection Initial Cleaning Protection
Natural Effect
Protection
Color Enhancing
Standard
Maintenance
Special
Maintenance
Fila PRW200 Fila PS/87 Fila Fob NA Fila Cleaner NA

Refer to Care + Maintenance PDF for descriptions and cleaning instructions.

Important information about this material
Zebra Gray is a limestone featuring dramatic linear striations, from Italian manufacturer 14OraItaliana. Slabs, tiles and mosaics can be combined within a space, allowing for both variety and continuity.

 Technical Performance Specs
Rating ABRASION RESISTANCE
(The ability of a material to resist surface wear.)
High This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
Rating ABSORPTION
(The relative porosity of a material.)
Moderate This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
Rating ACID SENSITIVITY
(The likelihood of a material reacting to acidic foods or liquids.)
High This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material.
Rating FREEZE-THAW
(The ability of a material to withstand freeze-thaw cycles in exterior applications.)
All Exteriors Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use MIA standards for thickness in exteriors and consult an engineer regarding fastening systems and thickness/tensile strength required for your project. This material will patina.

Refer to Technical Performance Specs PDF for descriptions of criteria.

© 2014 Stone Source LLC. All rights reserved. - Terms of Use