Old Growth Walnut
FINISH: Skip Dressed (Vintage)

Black Walnut - Vintage - Uncoated

Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.


MATERIAL: Old Growth Wood
COATING: Uncoated
Availability Type Width Length Thickness Finish / Texture
Special Order Solid 3"-6" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Solid 4"-8" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Solid 6"-10" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Solid 8"-11" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Engineered 3"-12" 2'-8' 5/8" Skip Dressed (Vintage)

Refer to Inventory Overview PDF for "Availability" descriptions.

Exterior Cladding Exterior Pavers Interior Walls Interior Floors Kitchen Countertops Other Countertops Wet Areas Traffic
No No Yes Yes No No No Light Commercial

Refer to Applications Guide PDF for descriptions and most commonly used materials by application.

Care + Maintenance
Initial Cleaning Standard

Dry Mop


Follow manufacturers instructions for finish applied on site.

Refer to Care + Maintenance PDF for descriptions and cleaning instructions for materials treated with Natural Oil or UV Cure Aluminum Oxide. For uncoated materials, that are finished on site, follow the manufacturers instructions.

Important information about this material
Cut from slow-growth, virgin walnut timbers that are more than 100 years old. Expect coffee-colored browns with occasional touches of caramel from its light sapwood, as well as an extraordinarily tight grain pattern, sound knots and natural checking. This material is manufactured without steaming to preserve light sapwood accents and createa natural, one-of-a-kind sheen. Planks are cut using an antique, 60-in. saw blade to replicate the rustic look of early milling. Edge milling include square, rounded and bevel. This material is produced to order. For solid wood, please allow a 4-5 week lead time for production. For Engineered Wood, please allow a 6-7 week lead time for production.
(The pre-finish applied to the surface of the wood.)
No Uncoated materials are ideal for clients wishing to apply their own site sand and finish. This uncoated material will feature more surface patina and saw marks than materials treated with Water-Based Polyurethane or Natural Oil. Pre-coated materials are precision-milled to allow maximum adhesion of the coating; this production process reduces the visibility of surface patina and saw marks.
(Materials may be resin filled.)
No Large knot holes, checking, nail holes, worm holes and other similar characteristics will not be resin-filled. Note that any substrate used in application may be visible through the holes in the material.
(Standard practice of allowing the moisture content in the wood to adjust to application.)
7-10 Days To properly acclimate materials, the wood should be unpacked and left in the dry, temperature controlled (60-70 degrees) jobsite after all other construction has been completed. Failure to properly acclimate materials may result in the boards warping.

© 2018 Stone Source LLC. All rights reserved. - Terms of Use