Old Growth Hickory
FINISH: Skip Dressed (Vintage)

Create Pdf
Hickory - Vintage - UV Cure Aluminum Oxide

Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.

RELATED INFORMATION:

MATERIAL: Old Growth Wood
COATING: Water-Based Polyurethane
Inventory
Availability Type Width Length Thickness Finish / Texture
Special Order Solid 3"-6" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Solid 4"-8" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Solid 6"-10" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Solid 8"-11" 2'-12' 3/4" Skip Dressed (Vintage)
Special Order Engineered 3"-12" 2'-8' 5/8" Skip Dressed (Vintage)

Refer to Inventory Overview PDF for "Availability" descriptions.

Applications
Exterior Cladding Exterior Pavers Interior Walls Interior Floors Kitchen Countertops Other Countertops Wet Areas Traffic
No No Yes Yes No No No Medium Commercial

Refer to Applications Guide PDF for descriptions and most commonly used materials by application.

Care + Maintenance
Initial Cleaning Standard
Maintenance
Special
Maintenance

Dry Mop

NA NA

Refer to Care + Maintenance PDF for descriptions and cleaning instructions for materials treated with Natural Oil or UV Cure Aluminum Oxide. For uncoated materials, that are finished on site, follow the manufacturers instructions.

Important information about this material
Cut from dead or fallen virgin wood timbers that are centuries old, our Old Growth Vintage Hickory features wide variations in color
YES / NO COATING
(The pre-finish applied to the surface of the wood.)
Yes This material is pre-finished with a Water-Based Polyurethane coating. Materials treated with UV Cure Aluminum Oxide are ideal for commercial applications requiring a durable, protective coating with a slight sheen. By comparison, Water-Based Polyurethane coatings will not darken materials as much as the Natural Oil coating. Water-Based Polyurethane is the most durable coating on the market, but is more difficult to spot treat than Natural Oil coatings. Our Water-Based Polyurethane coating contains 0% VOC and has no effect on indoor air quality. All pre-coated materials are precision-milled to allow maximum adhesion of the coating; this production process reduces the visibility of surface patina and saw marks.
YES / NO FILL
(Materials may be resin filled.)
Yes Large knot holes, checking and nail holes will be resin-filled. Worm holes and other smaller characteristics may not be filled.
DURATION ACCLIMATION
(Standard practice of allowing the moisture content in the wood to adjust to application.)
10-14 Days To properly acclimate materials, the wood should be unpacked and left in the dry, temperature controlled (60-70 degrees) jobsite after all other construction has been completed. Failure to properly acclimate materials may result in the boards warping.

© 2017 Stone Source LLC. All rights reserved. - Terms of Use