Old Growth White Oak
FINISH: Sanded

Create Pdf
White Oak - Smooth - Natural Oil

Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.

RELATED INFORMATION:

MATERIAL: Old Growth Wood
COATING: Natural Oil
Inventory
Availability Type Width Length Thickness Finish / Texture
Special Order Solid 3"-6" 2'-10' 3/4" Sanded
Special Order Solid 4"-8" 2'-10' 3/4" Sanded
Special Order Solid 6"-10" 2'-10' 3/4" Sanded
Special Order Solid 8"-11" 2'-10' 3/4" Sanded
Special Order Engineered 3"-12" 2'-8' 5/8" Sanded

Refer to Inventory Overview PDF for "Availability" descriptions.

Applications
Exterior Cladding Exterior Pavers Interior Walls Interior Floors Kitchen Countertops Other Countertops Wet Areas Traffic
No No Yes Yes No No No Medium Commercial

Refer to Applications Guide PDF for descriptions and most commonly used materials by application.

Care + Maintenance
Initial Cleaning Standard
Maintenance
Special
Maintenance

Dry Mop

NA

Monocoat Refresh / Monocoat Maintenance Oil

Refer to Care + Maintenance PDF for descriptions and cleaning instructions for materials treated with Natural Oil or UV Cure Aluminum Oxide. For uncoated materials, that are finished on site, follow the manufacturers instructions.

Important information about this material
A popular hardwood that stands the test of time, Old Growth White Oak contains sound knots and checking. It is precision milled to produce a pleasant mixture of rift, quartered and plain sawn planks. This material is produced to order. For solid wood, please allow a 6-7 week lead time for production. For Engineered Wood, please allow an 8-9 week lead time for production.
YES / NO COATING
(The pre-finish applied to the surface of the wood.)
Yes This material is pre-finished with a Natural Oil coating. Natural Oil is a penetrating sealer that deepens the color of the wood and highlights its natural grain. Our Natural Oil coating contains 0% VOC and has no effect on indoor air quality. It meets the requirements set by the LEED building rating system and may be used to earn LEED MR Credit 6 and IEQ 4.4. Natural Oil is ideal for applications requiring a protective coating that can be easily repaired and maintained.
YES / NO FILL
(Materials may be resin filled.)
Yes Large knot holes, checking and nail holes will be resin-filled. Worm holes and other smaller characteristics may not be filled.
DURATION ACCLIMATION
(Standard practice of allowing the moisture content in the wood to adjust to application.)
7-10 Days To properly acclimate materials, the wood should be unpacked and left in the dry, temperature controlled (60-70 degrees) jobsite after all other construction has been completed. Failure to properly acclimate materials may result in the boards warping.

© 2017 Stone Source LLC. All rights reserved. - Terms of Use