Create Pdf

Celador

Description

Celador is a quartz based agglomerate, cast into tiles and slabs. Celador is highly durable and is suitable for many residential and commercial interior applications.

Sizes

Standard nominal tiles sizes are 24"x24" tiles and 2CM or 3CM slabs. Slabs are 55"x118". Other sizes are available, including cut-to-size.

Colors + Finishes

There are 12 colors in the Celador Series. All colors come standard in a polished finish.

The Celador color line includes solid colors with quartz particles. Custom Colors require a minimum of approximately 6,500 square feet of tile or 3,000 square feet of slabs. For additional information about color availability and minimum quantity requirements, please contact your local Stone Source Representative.

Celador is stocked in:
Super White - Polished - 24" x 24" x 1/2"
Super White - Polished - 1-1/4" Slab

Applications

Celador is extremely hard and dense and has practically no porosity. It will not react to acid, making Celador an excellent material for residential and commercial floors, interior walls, counters, backsplashes and others. As a floor tile, it will withstand wear, even on heavy traffic commercial floors, resist staining and requires low maintenance (see notes below regarding white colors for flooring). Celador is suitable for kitchen counters and other working surfaces due to its hardness, low porosity, resistance to stains acids, and cracking and will not support bacteria growth.

Celador should NOT be used for radiant heating.

Installation

For floor tiles up to 24"x24", the substrate must be flat, stable, solid, free of cracks, smooth, dry and clean. Use Laticrete 333 Super Flexible Additive with Laticrete 317 Floor 'N Wall Thin Set Mortar, or approved equal. Apply adhesive to the full back of each tile. Tap tiles with a rubber mallet to ensure even laying. Recommended grout width, up to 16"x16" is 1/16" and 3/16" grout width for larger tiles, using Laticrete 1600 Series sanded grout. For other applications, contact your Stone Source representative or Laticrete for recommended materials and installation methods.

Maintenance

Remove dirt and liquids as soon as possible. For polished finish, clean and buff regularly with a neutral detergent. Honed finish Celador requires more maintenance than the polished finish. For honed finish tiles, or for all finishes of the white/light colored cleaners such as Tri Point Deep Cleaning Concentrate with Tripoint microfiber mops may be more effective, and more frequent cleanings are necessary.

Colors
Click on the photo to learn more.

Super White
#100
Crema Beige
#102
Light Gray
#111
Smoky Gray
#110

© 2014 Stone Source LLC. All rights reserved. - Terms of Use