White
FINISH: Textured

Flow_white_30x120S

Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.

RELATED INFORMATION:

Material Considerations
Explains what to expect with materials. IF YOU READ NOTHING ELSE, READ THIS.
Inventory Overview
Defines material options and availability.
Applications Guide
Lists the materials most commonly used in each application.
Care + Maintenance
Gives guidelines for ensuring that materials last over time.
Technical Performance Specs
Defines criteria we use to rate the performance of our materials.
SERIES: Flow
MATERIAL: Porcelain Tile
COLOR RANGE: White
Inventory
Availability Type Nominal Size Thickness Finish
Special Order Tile 6"x48" 11mm Textured
Limited Stock Tile 12"x48" 11mm Textured

Refer to Inventory Overview PDF for "Availability" descriptions.

Applications
Exterior Cladding Exterior Pavers Interior Walls Interior Floors Kitchen Countertops Other Countertops Wet Areas Traffic
X X X X NA NA X Heavy Commercial

Refer to Applications Guide PDF for descriptions and most commonly used materials by application.

Care + Maintenance
Pre-Grouting Protection Initial Cleaning Protection
Natural Effect
Protection
Color Enhancing
Standard
Maintenance
Special
Maintenance
NA Deterdek/Fila CR10 NA NA Fila Cleaner Fila PS/87

Refer to Care + Maintenance PDF for descriptions and cleaning instructions.

Important information about this material
Flow is a collection of through body porcelain tiles designed for floors and walls. The idea behind this design is to preserve traces of the creation process within the surface of the ceramic material. Perhaps the most significant, spectacular element is the moment the material is poured into the moulds. This creates a texture with an irregular pattern. The distinctively uneven features are an invitation to observe the effects of light on the surface, to rediscover the flows and circular movements that lie within the primary imprinting process.

 Technical Performance Specs
Rating ABRASION RESISTANCE
(The ability of a material to resist surface wear.)
High This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
Rating ABSORPTION
(The relative porosity of a material.)
Low This material is virtually non-porous. No sealer is required and it is less likely to stain.
Rating ACID SENSITIVITY
(The likelihood of a material reacting to acidic foods or liquids.)
Minimal This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
Rating FREEZE-THAW
(The ability of a material to withstand freeze-thaw cycles in exterior applications.)
All Exteriors Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

Refer to Technical Performance Specs PDF for descriptions of criteria.


            

© 2017 Stone Source LLC. All rights reserved. - Terms of Use