Ash Grey
FINISH: Rockface

ash_3x6 rock_web

Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.


Material Considerations
Explains what to expect with materials. IF YOU READ NOTHING ELSE, READ THIS.
Inventory Overview
Defines material options and availability.
Applications Guide
Lists the materials most commonly used in each application.
Care + Maintenance
Gives guidelines for ensuring that materials last over time.
Technical Performance Specs
Defines criteria we use to rate the performance of our materials.
SERIES: Tranquility
MATERIAL: Porcelain Tile
Availability Type Nominal Size Thickness Finish
Special Order Tile 2"x24" 10mm Rockface
Special Order Tile 4"x24" 10mm Rockface
Special Order Tile 6"x6" 10mm Rockface
Special Order Tile 6"x24" 10mm Rockface
Special Order Tile 12"x12" 10mm Rockface
Special Order Tile 12"x24" 10mm Rockface
Special Order Tile 24"x24" 10mm Rockface

Refer to Inventory Overview PDF for "Availability" descriptions.

Exterior Cladding Exterior Pavers Interior Walls Interior Floors Kitchen Countertops Other Countertops Wet Areas Traffic
X X X X NA NA X Heavy Commercial

Refer to Applications Guide PDF for descriptions and most commonly used materials by application.

Care + Maintenance
Pre-Grouting Protection Initial Cleaning Protection
Natural Effect
Color Enhancing
NA Deterdek/Fila CR10 NA NA Fila Cleaner Fila PS/87

Refer to Care + Maintenance PDF for descriptions and cleaning instructions.

Important information about this material
Tranquility is a through-body, double loaded porcelain tile with a contemporary look. The series includes twelve colors, available in a Brushed, Honed, Matte, Polished, Rockface and Stream finish.

 Technical Performance Specs
(The ability of a material to resist surface wear.)
High This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
(The relative porosity of a material.)
Low This material is virtually non-porous. No sealer is required and it is less likely to stain.
(The likelihood of a material reacting to acidic foods or liquids.)
Minimal This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
(The ability of a material to withstand freeze-thaw cycles in exterior applications.)
All Exteriors Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

Refer to Technical Performance Specs PDF for descriptions of criteria.


© 2017 Stone Source LLC. All rights reserved. - Terms of Use