Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual.
RELATED INFORMATION:
|
| SERIES: |
Tranquility |
| MATERIAL: |
Porcelain Tile |
| COLOR RANGE: |
Gray |
|
| Availability |
Type |
Size |
Thickness |
Finish |
| Non-Stock |
Tile |
12"x12" |
|
Rockface |
| Non-Stock |
Tile |
12"x24" |
|
Rockface |
| Non-Stock |
Tile |
24"x24" |
|
Rockface |
Refer to Inventory Overview PDF for "Availability" descriptions.
|
| Exterior Cladding |
Exterior Pavers |
Interior Walls |
Interior Floors |
Kitchen Countertops |
Other Countertops |
Wet Areas |
Traffic |
| X |
X |
X |
X |
NA |
NA |
X |
Heavy Commercial |
Refer to Applications Guide PDF for descriptions and most commonly used materials by application.
|
| Pre-Grouting Protection |
Initial Cleaning |
Protection
Natural Effect |
Protection
Color Enhancing |
Standard
Maintenance |
Special
Maintenance |
| NA |
Deterdek/Fila CR10 |
NA |
NA |
Fila Cleaner |
Fila PS/87 |
Refer to Care + Maintenance PDF for descriptions and cleaning instructions.
|
| Tranquility is a through-body, double loaded porcelain tile with a contemporary look. The series includes nine colors, available in a Brushed, Honed, Matte, Polished, Rockface and Stream finish. |
| |
| Rating |
ABRASION RESISTANCE
(The ability of a material to resist surface wear.) |
| High |
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc. |
| Rating |
ABSORPTION
(The relative porosity of a material.) |
| Low |
This material is virtually non-porous. No sealer is required and it is less likely to stain. |
| Rating |
ACID SENSITIVITY
(The likelihood of a material reacting to acidic foods or liquids.) |
| Minimal |
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes. |
| Rating |
FREEZE-THAW
(The ability of a material to withstand freeze-thaw cycles in exterior applications.) |
| All Exteriors |
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project. |
Refer to Technical Performance Specs PDF for descriptions of criteria.
|
