- Natural Stone
- Porcelain Tile
- Ceramic Tile
- Glass Tile
- Engineered Stone
Video: Choosing Materials for Bathrooms or Wet Areas
Now playing: Choosing Materials for Bathrooms or Wet Areas
When it comes to choosing materials for wet areas – whether it’s a commercial restroom or residential bathroom, it’s important to consider both the aesthetics and performance characteristics.
Popular choices for wet areas include: Natural stone, (such as: Marble, Limestone, Quartzite, Travertine, Basalt, Schist and Slate), as well as porcelain tile, ceramic tile, engineered stone and glass tile.
But before making your selection, consider the following technical characteristics to ensure that you’re selecting the material that works best for your project:
1) The material’s Absorption Rating
Materials with a Minimal Absorption rate (i.e. some Engineered Stone or Porcelain Tile) are virtually non-porous and no sealer is required. These materials are less likely to stain, and they are typically easier to maintain.
Materials with a Moderate Absorption rate are resistant to staining due to low porosity, but not impervious.
Materials with A High Absorption rate are prone to staining but can still be used. Always seal natural stone prior to use.
You’ll also want to make sure that the material won’t effloresce, which is when a white film develops on the material. This usually happens on dark, porous limestone. Your stone provider should be able to point you in the right direction.
2) The material’s Likelihood to React to Acid
Acidic cleaners and other acidic pollutants will etch materials that contain calcium or magnesium carbonate (i.e. marble, limestone and travertine). Materials rated as Moderately Sensitive or Highly Sensitive will patina more rapidly than materials rated as Minimally Sensitive. If you choose a material that is sensitive to acid, be sure to understand the cleaning and maintenance products that should be used.
3) The Material’s Slip Resistance
For floors in the shower and anywhere water is likely to accumulate, check the material’s COF or DCOF, which stands for coefficient of friction or dynamic coefficient of friction. A higher COF or DCOF means higher slip resistance.
Be sure to evaluate the material’s technical performance characteristics before making a selection. And remember – always seal natural stone prior to use.
Join our mailing list
Care & Maintenance
Reduce Appearance of Acid Etching Porous Natural Stone | DIY Porous Natural Stone | PRO Wet Effect | Solvent-Based | DIY Wet Effect | Water-Based | DIY Wet Effect | Water-Based | PRO Natural Stone | Water-Based | PRO Natural Stone | Water-Based | DIY Natural Stone | Solvent-Based | PRO Natural Stone | Solvent-Based | DIY Fila PD15 | PRO Fila PW10 Grout Joints Treatment FilaKristall Plus Epoxy Residue | PRO Compact Stone | Travertine | PRO Compact Stone | Travertine | DIY Compact Stone | PRO Compact Stone | DIY Color Enhancing Slate | Solvent-Based Color Enhancing | Water-Based | DIY Color Enhancing | Water-Based | PRO FilaStop Dirt
Design & Inspiration
HD Expo 2016 2016 Spring / Summer Collections VOA: Company Culture/Visual Intrigue Jeffrey Rudes: Luxury Retail Tierras Launch Event 10 Years of Mutina Up Close w/ Patricia Urquiola 2015 Spring/Summer Collections 2014 Spring/Summer Collections Up Close w/Barber & Osgerby Mutina: Salone del Mobile 2014 Good Mews in New York Elegance & A Modern Aesthetic A&D Perspective Company Overview 41zero42 Event Video Story of the Source Pattern & Color in Porcelain Tile Porcelain Tile w/ the Look of Wood