Buildtech

Buildtech is a series of through-body porcelain tile with a contemporary aesthetic, notable for its range in colors, styles, finishes, sizes and thicknesses.

For more information, download the Buildtech brochure.

Collections - Featured - Buildtech
COLORS, FINISHES & SIZES

Available in 6 colors, each in 3 styles and 3 finishes.

Sizes – Nominal (and Actual):

    Tiles in Natural and Polished Finishes:

  • 12″ x 24″ (11-3/4″ x 23-5/8″)
  • 16″ x 32″ (15-3/4″ x 31-1/2″)
  • 24″ x 24″ (23-5/8″ x 23-5/8″)
  • 24″ x 48″ (23-5/8″ x 47-1/8″)
  • 32″ x 32″ (31-1/2″ x 31-1/2″)
    Tiles in Slate-Hammered Finish:

  • 12″ x 24″ (11-3/4″ x 23-5/8″)
  • 16″ x 32″ (15-3/4″ x 31-1/2″)
  • 24″ x 24″ (23-5/8″ x 23-5/8″)
  • 32″ x 32″ (31-1/2″ x 31-1/2″)

Thickness: 10mm

Tiles in Slate-Hammered Finish are also available in a 20mm thickness in the 24″ x 24″ size.

Tiles are rectified and mono-caliber.

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic
  • Exterior Cladding
  • Exterior Pavers (ONLY applicable to 20mm Slate-Hammered item)
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Buildtech

Collections - Featured - Buildtech
COLORS, FINISHES & SIZES

Available in 6 colors, each in 3 styles and 3 finishes.

Sizes – Nominal (and Actual):

    Tiles in Natural and Polished Finishes:

  • 12″ x 24″ (11-3/4″ x 23-5/8″)
  • 16″ x 32″ (15-3/4″ x 31-1/2″)
  • 24″ x 24″ (23-5/8″ x 23-5/8″)
  • 24″ x 48″ (23-5/8″ x 47-1/8″)
  • 32″ x 32″ (31-1/2″ x 31-1/2″)
    Tiles in Slate-Hammered Finish:

  • 12″ x 24″ (11-3/4″ x 23-5/8″)
  • 16″ x 32″ (15-3/4″ x 31-1/2″)
  • 24″ x 24″ (23-5/8″ x 23-5/8″)
  • 32″ x 32″ (31-1/2″ x 31-1/2″)

Thickness: 10mm

Tiles in Slate-Hammered Finish are also available in a 20mm thickness in the 24″ x 24″ size.

Tiles are rectified and mono-caliber.

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic
  • Exterior Cladding
  • Exterior Pavers (ONLY applicable to 20mm Slate-Hammered item)
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.