Skip to content
Home / Collections / Porcelain Tile / Chromtech 1.0

Chromtech 1.0

Chromtech 1.0 is a series of through-body porcelain tiles, manufactured by Floor Gres, one of the leading Italian porcelain manufacturers.  Warm/4.0  meets the requirements set by the LEED building rating system and may be used to earn LEED MR Credits 4.1 and 4.2. Tiles in these colors have been certified by Bureau Veritas.

Chromtech-Banner2.0
COLORS, FINISHES & SIZES

Tiles are available in Matte, Polished and a three-dimensional Point finish, which is available in 12″x12″ and 12″x24″ tiles only. Point is notable both for its aesthetic and non-slip characteristics.

 

Tiles have a thickness is 3/8″ (10 mm) and are available in the following nominal (and actual) sizes:

  • 12″x12 (11.81″x11.81″),
  • 12″x24″ (11.81″x23.62″),
  • 24″x24″ (23.62″x23.62″)
  • 24″ x 48″ tiles are available in select colors.

Tiles are rectified.

 

APPLICATIONS

Chromtech 1.0 is suitable for interior and exterior walls and interior floors, including heavy traffic commercial floors.

INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Tiles feature perfectly squared edges and are mono-gauged, enabling the use of minimal grout joints, even when designing with multiple colors. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Chromtech 1.0

Chromtech-Banner2.0
COLORS, FINISHES & SIZES

Tiles are available in Matte, Polished and a three-dimensional Point finish, which is available in 12″x12″ and 12″x24″ tiles only. Point is notable both for its aesthetic and non-slip characteristics.

 

Tiles have a thickness is 3/8″ (10 mm) and are available in the following nominal (and actual) sizes:

  • 12″x12 (11.81″x11.81″),
  • 12″x24″ (11.81″x23.62″),
  • 24″x24″ (23.62″x23.62″)
  • 24″ x 48″ tiles are available in select colors.

Tiles are rectified.

 

APPLICATIONS

Chromtech 1.0 is suitable for interior and exterior walls and interior floors, including heavy traffic commercial floors.

INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Tiles feature perfectly squared edges and are mono-gauged, enabling the use of minimal grout joints, even when designing with multiple colors. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.