Skip to content
Home / Collections / Porcelain Tile / Ferrocemento

Ferrocemento

PRINT PAGE

Ferrocemento is a series of ink-jet, colored-body porcelain tile. It has the look of industrial metal with a worn, or distressed, appearance at its edges.

For more information, download the Ferrocemento brochure.

ferrocemento-hero-img

Colors, Finishes, Sizes & Applications

COLORS, FINISHES & SIZES
    Finish:

  • Natural
    Sizes – Nominal (and Actual):

  • 12″ x 24″ (29.7cm x 59.5cm)
  • 12″ x 24″ (29.7cm x 59.5cm) – Rectified
  • 24″ x 24″ (59.5cm x 59.5cm)
  • 12″ x 48″ (30cm x 120cm)
  • 24″ x 48″ (60cm x 120cm)
  • 48″ x 48″ (120cm x 120cm)
  • 48″ x 96″ (120cm x 241cm)
  • 48″ x 102″ (120cm x 260cm)
    Thickness:

  • 10mm
  • 6.5mm

Rectified tiles are mono-caliber within the same production run and from run to run, allowing for tiles to be mixed and matched from one production run to the next and from one color to another. However, as with most man-made materials, shading may vary slightly from one production run to the next.

SUSTAINABILITY

  • Leed v.4

Explore Sustainable Products

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic
  • Exterior Cladding
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. For staggered installations, use 1/3 or less in the joints. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.

For additional information on installation of oversized tiles (24″ x 24″ and larger) and porcelain slabs, refer to the following resource:

Raimondi Professional Tile Tools

DOWNLOAD PDF BROCHURE

Available Products

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

CONTACT US

Ferrocemento

ferrocemento-hero-img
COLORS, FINISHES & SIZES
    Finish:

  • Natural
    Sizes – Nominal (and Actual):

  • 12″ x 24″ (29.7cm x 59.5cm)
  • 12″ x 24″ (29.7cm x 59.5cm) – Rectified
  • 24″ x 24″ (59.5cm x 59.5cm)
  • 12″ x 48″ (30cm x 120cm)
  • 24″ x 48″ (60cm x 120cm)
  • 48″ x 48″ (120cm x 120cm)
  • 48″ x 96″ (120cm x 241cm)
  • 48″ x 102″ (120cm x 260cm)
    Thickness:

  • 10mm
  • 6.5mm

Rectified tiles are mono-caliber within the same production run and from run to run, allowing for tiles to be mixed and matched from one production run to the next and from one color to another. However, as with most man-made materials, shading may vary slightly from one production run to the next.

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic
  • Exterior Cladding
Sustainability

  • Leed v.4

INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. For staggered installations, use 1/3 or less in the joints. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.

For additional information on installation of oversized tiles (24″ x 24″ and larger) and porcelain slabs, refer to the following resource:

Raimondi Professional Tile Tools

Available Products

Ferrocemento is a series of ink-jet, colored-body porcelain tile. It has the look of industrial metal with a worn, or distressed, appearance at its edges.

For more information, download the Ferrocemento brochure.