Home / Collections / Porcelain Tile / Floortech 1.0

Floortech 1.0

Floortech 1.0 is a series of ink-jet through-color porcelain tiles reminiscent of premium natural limestone. The collection features a warm palette of shades ranging from white to gray.

floortech-hero-img
COLORS, FINISHES & SIZES
    Finishes:

  • Cannete
  • Decor
  • Muretto 3D
  • Slate
  • Soft
    Sizes – Nominal (and Actual):

  • 12″x 24″ (11.8″x23.6″)
  • 24″x 24″ (23.6″ x 23.6″)
  • 24″x 48″ (23.6″ x 47.2″)
  • 32″x 32″ (31.5″x31.5″)
  • 2″x 2″ mosaics
  • Note: Available sizes vary by color/texture

Listello patterns and trim pieces are also available upon request.

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic (with exception of Muretto 3D, which is suitable for Walls Only)
  • Exterior Cladding
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Floortech 1.0

floortech-hero-img
COLORS, FINISHES & SIZES
    Finishes:

  • Cannete
  • Decor
  • Muretto 3D
  • Slate
  • Soft
    Sizes – Nominal (and Actual):

  • 12″x 24″ (11.8″x23.6″)
  • 24″x 24″ (23.6″ x 23.6″)
  • 24″x 48″ (23.6″ x 47.2″)
  • 32″x 32″ (31.5″x31.5″)
  • 2″x 2″ mosaics
  • Note: Available sizes vary by color/texture

Listello patterns and trim pieces are also available upon request.

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic (with exception of Muretto 3D, which is suitable for Walls Only)
  • Exterior Cladding
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.