Q-Stone Minimal
Q-Stone is a series of porcelain tiles that mimics the look of monochromatic quartzite. Comprised of at least 40% recycled material, Q-Stone meets the requirements set by the LEED building rating system and may be used to earn LEED MR Credits 4.1 and 4.2.
Colors, Finishes, Sizes & Applications
COLORS, FINISHES & SIZES
- Finishes:
- Natural
- Sizes: Nominal (and actual):
- 12″x24″ (11.73″x23.54″)
Mosaic, listello patterns, trim pieces and stair treads are available.
APPLICATIONS
- Suitable for:
- Interior Walls
- Interior Floors, including heavy commercial traffic
- Exterior Cladding
INSTALLATION & MAINTENANCE
Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.
Available Products
HAVE A QUESTION?
Get in Touch with a Stone Source Representative.
Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.
Q-Stone Minimal

COLORS, FINISHES & SIZES
- Finishes:
- Natural
- Sizes: Nominal (and actual):
- 12″x24″ (11.73″x23.54″)
Mosaic, listello patterns, trim pieces and stair treads are available.
APPLICATIONS
- Suitable for:
- Interior Walls
- Interior Floors, including heavy commercial traffic
- Exterior Cladding
INSTALLATION & MAINTENANCE
Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.
Available Products
Q-Stone is a series of porcelain tiles that mimics the look of monochromatic quartzite. Comprised of at least 40% recycled material, Q-Stone meets the requirements set by the LEED building rating system and may be used to earn LEED MR Credits 4.1 and 4.2.