Tape is a series of glazed porcelain tile designed by Yael Mer and Shay Alkalay of Raw Edges Design Studio for Mutina. The collection gives the appearance of geometric patterns stenciled onto the surface of the tile, each with varying scale and saturation, from almost imperceptible to bold. Each style is designed to be used on its own or applied adjacent to others within the collection for infinite application possibilities.

Collections - Featured - Tape
COLORS, FINISHES & SIZES

Available in 5 color families, each with full patterns and half patterns.

Sizes: Nominal (and actual):

  • 8” x 8” (20.5cm x 20.5cm)

Thickness:

  • 3/8″ (10mm)
APPLICATIONS

Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic
  • Exterior Cladding
  • Exterior Floors
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. Use high-quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent. The designers and manufacturer of this collection recommend a 2 mm grout joint. However, Stone Source recommends a grout joint of 1/8″ (3.175 mm) or greater. For more information on grout joints, refer to the Stone Source Grout Joint Guide. For staggered installations, use 1/3 or less in the joints.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Tape

Collections - Featured - Tape
COLORS, FINISHES & SIZES

Available in 5 color families, each with full patterns and half patterns.

Sizes: Nominal (and actual):

  • 8” x 8” (20.5cm x 20.5cm)

Thickness:

  • 3/8″ (10mm)
APPLICATIONS

Suitable for:

  • Interior Walls
  • Interior Floors, including heavy commercial traffic
  • Exterior Cladding
  • Exterior Floors
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. Use high-quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent. The designers and manufacturer of this collection recommend a 2 mm grout joint. However, Stone Source recommends a grout joint of 1/8″ (3.175 mm) or greater. For more information on grout joints, refer to the Stone Source Grout Joint Guide. For staggered installations, use 1/3 or less in the joints.