Skip to content
Home / Shop / Azzurro

24 Azzurro

Finish: Matte
Material: Porcelain Tile and Slabs
Collection: I Colori

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderMosaic1"x1"5.5mmMatte
Special OrderMosaic2"x2"5.5mmMatte
Special OrderTile2"x8"6.5mmMatte
Special OrderTile4"x4"8mmMatte
Special OrderTile8"x8"8mmMatte

I Colori

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy. The collection includes a variety of surfaces- matte, glossy, and nonslip-that can be matched together perfectly to create high-quality design proposals. Thanks to its high chromatic precision, the collection can perfectly match any color scheme.

IMPORTANT INFORMATION

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy. In general, mosaics can be difficult to maintain in flooring applications with heavier traffic, particularly due to the amount of grout required. Textured materials are more difficult to maintain than honed or polished. Use a sealer to minimize staining. See the Applications Guide PDF for alternatives.

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Light Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

I-Colori-Azzurro-Porcelain-Tile

24 Azzurro

Finish: Matte
Material: Porcelain Tile and Slabs
Collection: I Colori

IMPORTANT INFORMATION

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy. In general, mosaics can be difficult to maintain in flooring applications with heavier traffic, particularly due to the amount of grout required. Textured materials are more difficult to maintain than honed or polished. Use a sealer to minimize staining. See the Applications Guide PDF for alternatives.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Light Commercial

Sustainability

ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy. The collection includes a variety of surfaces- matte, glossy, and nonslip-that can be matched together perfectly to create high-quality design proposals. Thanks to its high chromatic precision, the collection can perfectly match any color scheme.