Home / Products / Basic

Basic

Finish: Polished
Material: Engineered Stone
Collection: Celador 2.0

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderTile12"x12"10mmPolished
Special OrderTile12"x24"10mmPolished
Special OrderTile12"x48"10mmPolished
Special OrderTile16"x16"10mmPolished
Special OrderTile24"x24"10mmPolished
Special OrderTile24"x48"10mmPolished
Special OrderTile48"x48"10mmPolished
Special OrderSlab120"x55"2CMPolished
Special OrderSlab120"x55"3CMPolished

Celador 2.0

Celador 2.0 is a quartz-based agglomerate, cast into tiles and slabs. It is highly durable and is suitable for many residential and commercial applications, including kitchen countertops, bar tops and vanities, as well as heavy-commercial flooring applications such as lobbies, retail spaces and airports. Celador 2.0 is extremely hard and dense and is virtually non-porous, so no sealer is required and it is less likely to stain than other materials. Its low porosity limits the growth of bacteria. It will not react to acid, so it will not acid etch or lose its surface sheen when exposed to acidic foods such as lemons or tomatoes. Celador 2.0 has high abrasion resistance, so it is resistant to scratching. It can withstand wear, even on heavy traffic commercial floors, and it requires minimal maintenance.

IMPORTANT INFORMATION

Celador 2.0 is a quartz based agglomerate, cast into tiles and slabs. Celador 2.0 is highly durable and is suitable for many residential and commercial interior applications.

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: Yes
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx or slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Celador-2.0-Basic-Engineered-Stone

Basic

Finish: Polished
Material: Engineered Stone
Collection: Celador 2.0

IMPORTANT INFORMATION

Celador 2.0 is a quartz based agglomerate, cast into tiles and slabs. Celador 2.0 is highly durable and is suitable for many residential and commercial interior applications.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: Yes
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Heavy Commercial
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx or slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.

Celador 2.0 is a quartz-based agglomerate, cast into tiles and slabs. It is highly durable and is suitable for many residential and commercial applications, including kitchen countertops, bar tops and vanities, as well as heavy-commercial flooring applications such as lobbies, retail spaces and airports. Celador 2.0 is extremely hard and dense and is virtually non-porous, so no sealer is required and it is less likely to stain than other materials. Its low porosity limits the growth of bacteria. It will not react to acid, so it will not acid etch or lose its surface sheen when exposed to acidic foods such as lemons or tomatoes. Celador 2.0 has high abrasion resistance, so it is resistant to scratching. It can withstand wear, even on heavy traffic commercial floors, and it requires minimal maintenance.