Home / Products / Belair

Belair

Finish: Honed
Material: Limestone

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Limited StockTile12"x24"3/8"Honed

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Fila Cleaner
  • Protection Natural Effect: Fila Fob
  • Protection Color Enhancing: Fila Stone Plus
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: NA

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: Yes
  • Wet areas: No
  • Traffic: Medium Commercial

IMPORTANT INFORMATION

In general, light-colored limestone is difficult to maintain in flooring applications with heavier traffic. See the Applications Guide PDF for alternatives.

ABRASION RESISTANCE

Low

This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.

ABSORPTION

High

This material has a medium to high absorption rate. Always seal this material prior to use. Properly seal the material prior to grouting by applying several coats of sealant or until water beads up on the surface. Use Fila PRW200 to avoid staining from grout residues and specify a grout color that is similar to the color of the stone to avoid color bleeding into the material. Use low moisture setting materials. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.

ACID SENSITIVITY

High

This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

1401_lg

Belair

Finish: Honed
Material: Limestone

IMPORTANT INFORMATION

In general, light-colored limestone is difficult to maintain in flooring applications with heavier traffic. See the Applications Guide PDF for alternatives.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Fila Cleaner
  • Protection Natural Effect: Fila Fob
  • Protection Color Enhancing: Fila Stone Plus
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: NA

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: Yes
  • Wet areas: No
  • Traffic: Medium Commercial
ABRASION RESISTANCE

Low

This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.

ABSORPTION

High

This material has a medium to high absorption rate. Always seal this material prior to use. Properly seal the material prior to grouting by applying several coats of sealant or until water beads up on the surface. Use Fila PRW200 to avoid staining from grout residues and specify a grout color that is similar to the color of the stone to avoid color bleeding into the material. Use low moisture setting materials. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.

ACID SENSITIVITY

High

This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.