Black
Finish: Natural
Material: Porcelain Tile and Slabs
Collection: Signs
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Limited Stock | Tile | 6"x9" | 8mm | Natural |
Signs
Applications
- Exterior Cladding: Yes
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: No
- Kitchen Countertops: No
- Other Countertops: No
- Wet areas: Yes
- Traffic: Not a Flooring Project
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Deterdek/Fila CR10
- Protection Natural Effect: Not Applicable
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: Fila PS/87
ABRASION RESISTANCE
High
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
ABSORPTION
Low
This material is virtually non-porous. No sealer is required and it is less likely to stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.
HAVE A QUESTION?
Get in Touch with a Stone Source Representative.
Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.
Black
Finish: Natural
Material: Porcelain Tile and Slabs
Collection: Signs
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Limited Stock | Tile | 6"x9" | 8mm | Natural |
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Deterdek/Fila CR10
- Protection Natural Effect: Not Applicable
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: Fila PS/87
Applications
- Exterior Cladding: Yes
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: No
- Kitchen Countertops: No
- Other Countertops: No
- Wet areas: Yes
- Traffic: Not a Flooring Project
ABRASION RESISTANCE
High
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
ABSORPTION
Low
This material is virtually non-porous. No sealer is required and it is less likely to stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.