Calacatta Vision
Finish: Polished
Material: Marble
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Special Order | Tile | 7.5"x15" | 0.37" | Polished |
| Stocking Program | Tile | 12"x24" | 00.37" | Polished |
| Special Order | Tile | 16"x16" | .375" | Polished |
| Special Order | Slab | Varies by slab. | 2 CM | Polished |
| Special Order | Tile | 18"x18" | .375" | Polished |
| Special Order | Tile | 24"x24" | .375" | Polished |
Care + Maintenance
- Pre-Grouting Protection: Fila PRW200
- Initial Cleaning: Fila Cleaner
- Protection Natural Effect: Fila MP90
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: NA
Applications
- Exterior Cladding: No
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: No
- Other Countertops: Yes
- Wet areas: Yes
- Traffic: Heavy Commercial
IMPORTANT INFORMATION
Most marble has naturally occurring cracks and fissures. Expect to see factory repairs. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer.
See how architects and designers have used this material in their projects. To see all projects, visit our project gallery.
Calacatta Vision Slabs (Finish: Polished)
Digital image color may vary from actual slab coloration. Photos are examples only. Actual stock changes frequently. Please contact your Stone Source Sales Consultant to view photos of slabs currently in stock. Each slab will have different characteristics. It is recommended that slabs be inspected prior to purchase.
ABRASION RESISTANCE
Low
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
ABSORPTION
Moderate
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
ACID SENSITIVITY
Moderate
This material is moderately sensitive to acids. Generally, acid etching will be less visible on lighter stones and honed surfaces. The finish will patina over time. If acid etching is a concern, select a minimally sensitive material.
FREEZE-THAW
Not Recommended
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.
HAVE A QUESTION?
Get in Touch with a Stone Source Representative.
Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.
Calacatta Vision
Finish: Polished
Material: Marble
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Special Order | Tile | 7.5"x15" | 0.37" | Polished |
| Stocking Program | Tile | 12"x24" | 00.37" | Polished |
| Special Order | Tile | 16"x16" | .375" | Polished |
| Special Order | Slab | Varies by slab. | 2 CM | Polished |
| Special Order | Tile | 18"x18" | .375" | Polished |
| Special Order | Tile | 24"x24" | .375" | Polished |
IMPORTANT INFORMATION
Most marble has naturally occurring cracks and fissures. Expect to see factory repairs. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer.
Care + Maintenance
- Pre-Grouting Protection: Fila PRW200
- Initial Cleaning: Fila Cleaner
- Protection Natural Effect: Fila MP90
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: NA
Applications
- Exterior Cladding: No
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: No
- Other Countertops: Yes
- Wet areas: Yes
- Traffic: Heavy Commercial
ABRASION RESISTANCE
Low
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
ABSORPTION
Moderate
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
ACID SENSITIVITY
Moderate
This material is moderately sensitive to acids. Generally, acid etching will be less visible on lighter stones and honed surfaces. The finish will patina over time. If acid etching is a concern, select a minimally sensitive material.
FREEZE-THAW
Not Recommended
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.