Skip to content
Home / Shop / Coal

Coal

Finish: Matte, Strutturato
Material: Porcelain Tile and Slabs
Collection: Rawtech

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderTile12"x24"10mmMatte
Special OrderTile12"x24"10mmStrutturato
Special OrderTile16"x32"10mmMatte
Special OrderTile32"x32"10mmMatte
Special OrderTile24"x24"10mmMatte
Special OrderTile24"x24"10mmStrutturato
Special OrderTile24"x48"10mmMatte
Special OrderTile32"x71"10mmMatte
Special OrderTile48"x95"6mmMatte
Special OrderTile48"x48"6mmMatte
Special OrderTile24"x48"6mmMatte

Rawtech

Rawtech is a series of ink jet, colored-body porcelain tile with the look of unfinished, raw cement. The design approach captures the true identity of an essentially industrial product, and appeals to contemporary living styles. With intentional imperfections, it provides the look of a tile worn by time with an unmistakable style.

 

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR31
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Rawtech_RawCoal

Coal

Finish: Matte, Strutturato
Material: Porcelain Tile and Slabs
Collection: Rawtech

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR31
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Sustainability

ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

Rawtech is a series of ink jet, colored-body porcelain tile with the look of unfinished, raw cement. The design approach captures the true identity of an essentially industrial product, and appeals to contemporary living styles. With intentional imperfections, it provides the look of a tile worn by time with an unmistakable style.