Skip to content
Home / Products / Deco 08

Deco 08

Finish: Glossy
Material: Porcelain Tile and Slabs
Collection: Artwork

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderTile24"x48"6mmGlossy
Special OrderTile47"x94"6mmGlossy

Artwork

Artwork is a series of porcelain tile with ink-jet technology. The style is characterized by fragments of matter and neutral colors, for a stylized surface with irregular shapes. The design is based on the combination of Venetian flooring and Ettore Sottsass’s Memphis Style patterns of 1980s Milan.

IMPORTANT INFORMATION

Basic patterns and Deco patterns differ in thickness and are not recommended for installation together, unless installed on separate planes or with use of a separator, such as a Schluter strip.

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: No
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: No
  • Traffic: Not a Flooring Project

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

757688.4

Deco 08

Finish: Glossy
Material: Porcelain Tile and Slabs
Collection: Artwork

IMPORTANT INFORMATION

Basic patterns and Deco patterns differ in thickness and are not recommended for installation together, unless installed on separate planes or with use of a separator, such as a Schluter strip.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: No
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: No
  • Traffic: Not a Flooring Project
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

Artwork is a series of porcelain tile with ink-jet technology. The style is characterized by fragments of matter and neutral colors, for a stylized surface with irregular shapes. The design is based on the combination of Venetian flooring and Ettore Sottsass’s Memphis Style patterns of 1980s Milan.