Skip to content
Home / Products / Edera

Edera

Finish: Matte
Material: Porcelain Tile and Slabs
Collection: I Colori

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderTile1"x1"5.5mmMatte
Special OrderTile2"x2"5.5mmMatte
Special OrderTile2"x2" - 2"x8"6.5mmMatte
Special OrderTile2" x 10"8mmMatte
Special OrderTile4"x4" - 8"x8"8mmMatte
Special OrderTile10"x30" - 10"x60" - 20"x60"8mmMatte

I Colori

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy.

IMPORTANT INFORMATION

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy.

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: No
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Not a Flooring Project

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR16
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

I-Colori-Edera-Porcelain-Tile

Edera

Finish: Matte
Material: Porcelain Tile and Slabs
Collection: I Colori

IMPORTANT INFORMATION

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR16
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: No
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Not a Flooring Project
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy.