Skip to content
Home / Shop / Floor 9.0

Floor 9.0

Finish: Soft
Material: Porcelain Tile and Slabs
Collection: Floortech 1.0

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderTile12"x24"10mmSoft
Special OrderTile24"x24"10mmSoft
Special OrderTile24"x48"10mmSoft
Special OrderTile32"x32"10mmSoft
Special OrderMosaic2"x2"10mmSoft

Floortech 1.0

Floortech 1.0 is a series of ink-jet through-color porcelain tiles reminiscent of premium natural limestone. The collection features a warm palette of shades ranging from white to gray.

IMPORTANT INFORMATION

Reminiscent of premium natural limestone, Floortech 1.0 is a series of through-body porcelain tiles by Italian manufacturer, Floor Gres. The series is comprised of 9 colors, 5 finishes and 6 sizes, and features a warm palette of shades ranging from white to gray. In general, mosaics can be difficult to maintain in flooring applications with heavier traffic, particularly due to the amount of grout required. Textured materials are more difficult to maintain than honed or polished. Use a sealer to minimize staining. See the Applications Guide PDF for alternatives.

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Floortech-Floor-9.0-Matte

Floor 9.0

Finish: Soft
Material: Porcelain Tile and Slabs
Collection: Floortech 1.0

IMPORTANT INFORMATION

Reminiscent of premium natural limestone, Floortech 1.0 is a series of through-body porcelain tiles by Italian manufacturer, Floor Gres. The series is comprised of 9 colors, 5 finishes and 6 sizes, and features a warm palette of shades ranging from white to gray. In general, mosaics can be difficult to maintain in flooring applications with heavier traffic, particularly due to the amount of grout required. Textured materials are more difficult to maintain than honed or polished. Use a sealer to minimize staining. See the Applications Guide PDF for alternatives.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Sustainability

ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

Floortech 1.0 is a series of ink-jet through-color porcelain tiles reminiscent of premium natural limestone. The collection features a warm palette of shades ranging from white to gray.