Home / Products / Grey

Grey

Finish: Matte
Material: Porcelain Tile and Slabs
Collection: Tex

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
StockTile4.5"x8"10mmMatte

Tex

IMPORTANT INFORMATION

Designed by Yael Mer and Shay Alkalay of Raw Edges studio, Tex is a rich multi-colored glazed porcelain tile collection inspired by woven textiles. It features an artisanal, hand-crafted surface texture and a unique rhombus shape. The shape of the tile is a simplified enlargement of the basic knitted stitch: when looking carefully into a knitted textile, a repetition of stitches can be seen aligned in symmetric rows next to each other. The colorful and natural glaze applied on the extruded clay body creates an irregular effect allowing for variations in color saturation. Manufactured by Mutina, Tex is available in the United States exclusively through Stone Source.

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Light Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

tex_grey

Grey

Finish: Matte
Material: Porcelain Tile and Slabs
Collection: Tex

IMPORTANT INFORMATION

Designed by Yael Mer and Shay Alkalay of Raw Edges studio, Tex is a rich multi-colored glazed porcelain tile collection inspired by woven textiles. It features an artisanal, hand-crafted surface texture and a unique rhombus shape. The shape of the tile is a simplified enlargement of the basic knitted stitch: when looking carefully into a knitted textile, a repetition of stitches can be seen aligned in symmetric rows next to each other. The colorful and natural glaze applied on the extruded clay body creates an irregular effect allowing for variations in color saturation. Manufactured by Mutina, Tex is available in the United States exclusively through Stone Source.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Light Commercial
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.