Home / Products / Murano 3

Murano 3

Finish: Gloss
Material: Glass Tile
Collection: Murrine

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderMosaic3/8"x3/8"4mmGloss

Murrine

Murrine is a series of hand-cut, artistic glass mosaic that draws its inspiration from historical Venetian murrine, in which colored patterns are made in a glass cane that are revealed when cut in cross-sections. The Murrine series pays tribute to ancient, Italian artisanal techniques while lending a contemporary aesthetic. Available in two standard styles: Burano and Murano. Material is comprised of up to 78% post-consumer recycled glass.

IMPORTANT INFORMATION

Murrine is a series of hand-cut, artistic glass mosaic comprised of up to 78% post-consumer recycled glass. Measurements may vary slightly due to the hand cut character of the product. Colors may vary slightly by production lot.

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Residential

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Vertical Exteriors

Due to this material's texture, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for vertical exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project. This material is not suitable for exterior paving applications.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Murrine-Murano-3-Module-Glass-Mosaic

Murano 3

Finish: Gloss
Material: Glass Tile
Collection: Murrine

IMPORTANT INFORMATION

Murrine is a series of hand-cut, artistic glass mosaic comprised of up to 78% post-consumer recycled glass. Measurements may vary slightly due to the hand cut character of the product. Colors may vary slightly by production lot.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Residential
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Vertical Exteriors

Due to this material's texture, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for vertical exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project. This material is not suitable for exterior paving applications.

Murrine is a series of hand-cut, artistic glass mosaic that draws its inspiration from historical Venetian murrine, in which colored patterns are made in a glass cane that are revealed when cut in cross-sections. The Murrine series pays tribute to ancient, Italian artisanal techniques while lending a contemporary aesthetic. Available in two standard styles: Burano and Murano. Material is comprised of up to 78% post-consumer recycled glass.