Mystique Black – Mosaic Penta
Finish: Natural
Material: Porcelain Tile and Slabs
Collection: Groove
Availability: | Type: | Nominal Size: | Thickness: | Finish: |
---|---|---|---|---|
Special Order | Mosaic | 13"x11" | 10mm | Natural |
Groove
Groove is a series of ink-jet porcelain tile with the look of northern European limestone and slate. The Groove collection mimics limestone and slate in their truest forms, from smooth sides to large impurities and variation, resulting in an authentic representation of the natural stone materials.
For more information, download the Groove brochure.
IMPORTANT INFORMATION
In general, mosaics can be difficult to maintain in flooring applications with heavier traffic, particularly due to the amount of grout required. Textured materials are more difficult to maintain than honed or polished. Use a sealer to minimize staining. See the Applications Guide PDF for alternatives.
Applications
- Exterior Cladding: Yes
- Exterior Pavers: Yes
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: No
- Other Countertops: No
- Wet areas: Yes
- Traffic: Heavy Commercial
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Deterdek/Fila CR10
- Protection Natural Effect: Not Applicable
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: Fila PS/87
ABRASION RESISTANCE
High
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
ABSORPTION
Low
This material is virtually non-porous. No sealer is required and it is less likely to stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.
HAVE A QUESTION?
Get in Touch with a Stone Source Representative.
Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Mystique Black – Mosaic Penta
Finish: Natural
Material: Porcelain Tile and Slabs
Collection: Groove
Availability: | Type: | Nominal Size: | Thickness: | Finish: |
---|---|---|---|---|
Special Order | Mosaic | 13"x11" | 10mm | Natural |
IMPORTANT INFORMATION
In general, mosaics can be difficult to maintain in flooring applications with heavier traffic, particularly due to the amount of grout required. Textured materials are more difficult to maintain than honed or polished. Use a sealer to minimize staining. See the Applications Guide PDF for alternatives.
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Deterdek/Fila CR10
- Protection Natural Effect: Not Applicable
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: Fila PS/87
Applications
- Exterior Cladding: Yes
- Exterior Pavers: Yes
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: No
- Other Countertops: No
- Wet areas: Yes
- Traffic: Heavy Commercial
Sustainability
ABRASION RESISTANCE
High
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
ABSORPTION
Low
This material is virtually non-porous. No sealer is required and it is less likely to stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.
Groove is a series of ink-jet porcelain tile with the look of northern European limestone and slate. The Groove collection mimics limestone and slate in their truest forms, from smooth sides to large impurities and variation, resulting in an authentic representation of the natural stone materials.
For more information, download the Groove brochure.