Pearl Gray
Finish: Polished
Material: Marble Clearance
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Special Order | Slab | Varies by slab. | 20mm | Polished |
Pearl Gray
Applications
- Exterior Cladding: No
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: No
- Other Countertops: Yes
- Wet areas: Yes
- Traffic: Medium Commercial
Care + Maintenance
- Pre-Grouting Protection: Fila PRW200
- Initial Cleaning: Fila Cleaner
- Protection Natural Effect: MP90
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: NA
ABRASION RESISTANCE
Low
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
ABSORPTION
Moderate
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
ACID SENSITIVITY
Moderate
This material is moderately sensitive to acids. Generally, acid etching will be less visible on lighter stones and honed surfaces. The finish will patina over time. If acid etching is a concern, select a minimally sensitive material.
FREEZE-THAW
Not Recommended
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.
HAVE A QUESTION?
Get in Touch with a Stone Source Representative.
Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.
Pearl Gray
Finish: Polished
Material: Marble Clearance
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Special Order | Slab | Varies by slab. | 20mm | Polished |
Care + Maintenance
- Pre-Grouting Protection: Fila PRW200
- Initial Cleaning: Fila Cleaner
- Protection Natural Effect: MP90
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: NA
Applications
- Exterior Cladding: No
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: No
- Other Countertops: Yes
- Wet areas: Yes
- Traffic: Medium Commercial
Sustainability
ABRASION RESISTANCE
Low
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
ABSORPTION
Moderate
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
ACID SENSITIVITY
Moderate
This material is moderately sensitive to acids. Generally, acid etching will be less visible on lighter stones and honed surfaces. The finish will patina over time. If acid etching is a concern, select a minimally sensitive material.
FREEZE-THAW
Not Recommended
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.