Home / Products / Portland Silver

Portland Silver

Finish: Honed, Matte, Polished
Material: Engineered Stone
Collection: Trascenda

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderSlab48"x118"6.6mmPolished
Special OrderSlab48"x118"6.6mmHoned
Special OrderSlab48"x118"6.6mmMatte

Trascenda

Trascenda™ is a material that uses the strength of an engineered stone combined with digital technology, using heat and pressure to transfer an image into the engineered surface. With Trascenda, nearly any design can be achieved, including the looks of wood, concrete or natural stone or custom graphics.

    Key features of Trascenda:

  • Resistant to heavy loads
  • Resistant to impact
  • Very thin and lightweight. Thickness is ¼” (6.6mm). Weight is 4.87 lbs. / SF.
  • Scratch resistant
  • Low absorption (0.2% compared to an average of 0.6% for porcelain and higher for natural stones)
  • Resistant to thermal shock
  • Chemical and acid resistant
  • Sensitive to prolonged UV ray exposure.
  • Can be used to create a bookmatch or diamond match appearance.

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: Yes
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Medium Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx or slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Trascenda_Portland-Silver_Engineered-Stone

Portland Silver

Finish: Honed, Matte, Polished
Material: Engineered Stone
Collection: Trascenda

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: Yes
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Medium Commercial
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx or slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.

Trascenda™ is a material that uses the strength of an engineered stone combined with digital technology, using heat and pressure to transfer an image into the engineered surface. With Trascenda, nearly any design can be achieved, including the looks of wood, concrete or natural stone or custom graphics.

    Key features of Trascenda:

  • Resistant to heavy loads
  • Resistant to impact
  • Very thin and lightweight. Thickness is ¼” (6.6mm). Weight is 4.87 lbs. / SF.
  • Scratch resistant
  • Low absorption (0.2% compared to an average of 0.6% for porcelain and higher for natural stones)
  • Resistant to thermal shock
  • Chemical and acid resistant
  • Sensitive to prolonged UV ray exposure.
  • Can be used to create a bookmatch or diamond match appearance.