Skip to content
Home / Shop / Red Oak

Red Oak

Finish: Natural
Material: Porcelain Tile and Slabs
Collection: Tavole Di Legno 2.0

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Limited Stock Tile8"x48"12mmNatural
Special OrderTile8"x71"12mmNatural

Tavole Di Legno 2.0

Tavole di Legno 2.0 is an ink-jet porcelain tile with surface variation and knotting typically found in wooden planks.

IMPORTANT INFORMATION

Tavole di Legno 2.0 is an ink-jet porcelain tile with surface variation and knotting typically found in wooden planks.

Tavole Di Legno 2.0 - Red Oak

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
Tavole Di Legno 2.0 - Floor: White Oak, Wall:Dark Walnut
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Vertical Exteriors

Due to this material's texture, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for vertical exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project. This material is not suitable for exterior paving applications.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

SR-11-20x120-1

Red Oak

Finish: Natural
Material: Porcelain Tile and Slabs
Collection: Tavole Di Legno 2.0

IMPORTANT INFORMATION

Tavole di Legno 2.0 is an ink-jet porcelain tile with surface variation and knotting typically found in wooden planks.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Vertical Exteriors

Due to this material's texture, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for vertical exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project. This material is not suitable for exterior paving applications.

Tavole di Legno 2.0 is an ink-jet porcelain tile with surface variation and knotting typically found in wooden planks.