Skip to content
Home / Products / Superwhite

Superwhite

Finish: Polished
Material: Engineered Stone
Collection: Celador 2.0

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderTile12"x12"10mmPolished
Special OrderTile12"x24"10mmPolished
Special OrderTile12"x48"10mmPolished
Special OrderTile16"x16"10mmPolished
Limited StockTile24"x24"10mmPolished
Special OrderTile24"x48"10mmPolished
Special OrderTile48"x48"10mmPolished
Limited StockTile18"x36"10mmPolished
StockSlab120"x55"2CMPolished
StockSlab120"x55"3CMPolished
Limited StockTile24"x24"1/2"Polished

Celador 2.0

IMPORTANT INFORMATION

Celador 2.0 is a quartz based agglomerate, cast into tiles and slabs. Celador 2.0 is highly durable and is suitable for many residential and commercial interior applications.

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: Yes
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx or slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Celador-2.0-Super-White-13-Engineered-Stone

Superwhite

Finish: Polished
Material: Engineered Stone
Collection: Celador 2.0

IMPORTANT INFORMATION

Celador 2.0 is a quartz based agglomerate, cast into tiles and slabs. Celador 2.0 is highly durable and is suitable for many residential and commercial interior applications.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: Yes
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Heavy Commercial
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx or slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.