Skip to content
Home / Shop / Tundra Gray

Tundra Gray

Finish: Honed
Material: Marble Clearance

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Stocking ProgramTile12"x24"13mmHoned

Tundra Gray

IMPORTANT INFORMATION

Most marble has naturally occurring cracks and fissures. Expect to see factory repairs. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer.

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Medium Commercial

Care + Maintenance

  • Pre-Grouting Protection: Fila PRW200
  • Initial Cleaning: Fila PS/87
  • Protection Natural Effect: Fila MP90
  • Protection Color Enhancing: Fila Stone Plus
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: NA
ABRASION RESISTANCE

Low

This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.

ABSORPTION

Moderate

This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.

ACID SENSITIVITY

High

This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

TUNDRA-GRAY-HONED-2CM-0921-U01-(1)

Tundra Gray

Finish: Honed
Material: Marble Clearance

IMPORTANT INFORMATION

Most marble has naturally occurring cracks and fissures. Expect to see factory repairs. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer.

Care + Maintenance

  • Pre-Grouting Protection: Fila PRW200
  • Initial Cleaning: Fila PS/87
  • Protection Natural Effect: Fila MP90
  • Protection Color Enhancing: Fila Stone Plus
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: NA

Applications

  • Exterior Cladding: No
  • Exterior Pavers: No
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: Yes
  • Wet areas: Yes
  • Traffic: Medium Commercial

Sustainability

ABRASION RESISTANCE

Low

This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.

ABSORPTION

Moderate

This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.

ACID SENSITIVITY

High

This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material.

FREEZE-THAW

Not Recommended

Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.