Ultra Blade – White 110
Finish: Gloss
Material: Ceramic Tile
Collection: 3D Wall Design
Availability: | Type: | Nominal Size: | Thickness: | Finish: |
---|---|---|---|---|
Limited Stock | Tile | 20"x43" | 8.5mm | Gloss |
3D Wall
3D Wall Design is a series of three-dimensional, white-body ceramic wall tile. The 3D Wall Design collection offers a contemporary approach to the ancient bas-relief sculpture technique. The relief details on the surface of the tiles are enhanced by light, resulting in a refined shadow effect. There are four three-dimensional styles and a flat, solid tile, offered in two finishes.
Applications
- Exterior Cladding: No
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: No
- Kitchen Countertops: No
- Other Countertops: No
- Wet areas: Yes
- Traffic: Not For Floors
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Deterdek/Fila CR10
- Protection Natural Effect: Not Applicable
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: Fila PS/87
ABRASION RESISTANCE
High
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
ABSORPTION
Low
This material is virtually non-porous. No sealer is required and it is less likely to stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
Not Recommended
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.
HAVE A QUESTION?
Get in Touch with a Stone Source Representative.
Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

Ultra Blade – White 110
Finish: Gloss
Material: Ceramic Tile
Collection: 3D Wall Design
Availability: | Type: | Nominal Size: | Thickness: | Finish: |
---|---|---|---|---|
Limited Stock | Tile | 20"x43" | 8.5mm | Gloss |
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Deterdek/Fila CR10
- Protection Natural Effect: Not Applicable
- Protection Color Enhancing: Not Applicable
- Standard Maintenance: Fila Cleaner
- Special Maintenance: Fila PS/87
Applications
- Exterior Cladding: No
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: No
- Kitchen Countertops: No
- Other Countertops: No
- Wet areas: Yes
- Traffic: Not For Floors
ABRASION RESISTANCE
High
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
ABSORPTION
Low
This material is virtually non-porous. No sealer is required and it is less likely to stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
Not Recommended
Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.
3D Wall Design is a series of three-dimensional, white-body ceramic wall tile. The 3D Wall Design collection offers a contemporary approach to the ancient bas-relief sculpture technique. The relief details on the surface of the tiles are enhanced by light, resulting in a refined shadow effect. There are four three-dimensional styles and a flat, solid tile, offered in two finishes.