Skip to content
Home / Products / White

White

Finish: Soft
Material: Porcelain Tile and Slabs
Collection: Walks 1.0

Inventory
Availability:Type:Nominal Size:Thickness:Finish:
Special OrderTile12"x24"10mmSoft
Special OrderTile24"x24"10mmSoft
Special OrderTile16"x32"10mmSoft
Special OrderTile32"x32"6mmSoft
Special OrderTile32"x95"6mmSoft
Special OrderTile63"x126"6mmSoft

Walks

Walks 1.0 features the look of quartzite in a through-body porcelain tile. Walks meets the requirements set by the LEED building rating system and may be used to earn the following LEED Credits MR 4.1 and 4.2, EQ 4, SS 7 and EA 1.

IMPORTANT INFORMATION

Walks, by Floor Gres, features the look of quartzite in a through-body porcelain tile. Walks meets the requirements set by the LEED building rating system and may be used to earn the following LEED Credits MR 4.1 and 4.2, EQ 4, SS 7 and EA 1.

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

728734

White

Finish: Soft
Material: Porcelain Tile and Slabs
Collection: Walks 1.0

IMPORTANT INFORMATION

Walks, by Floor Gres, features the look of quartzite in a through-body porcelain tile. Walks meets the requirements set by the LEED building rating system and may be used to earn the following LEED Credits MR 4.1 and 4.2, EQ 4, SS 7 and EA 1.

Care + Maintenance

  • Pre-Grouting Protection: Not Applicable
  • Initial Cleaning: Deterdek/Fila CR10
  • Protection Natural Effect: Not Applicable
  • Protection Color Enhancing: Not Applicable
  • Standard Maintenance: Fila Cleaner
  • Special Maintenance: Fila PS/87

Applications

  • Exterior Cladding: Yes
  • Exterior Pavers: Yes
  • Interior Walls: Yes
  • Interior Floors: Yes
  • Kitchen Countertops: No
  • Other Countertops: No
  • Wet areas: Yes
  • Traffic: Heavy Commercial
ABRASION RESISTANCE

High

This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.

ABSORPTION

Low

This material is virtually non-porous. No sealer is required and it is less likely to stain.

ACID SENSITIVITY

Minimal

This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.

FREEZE-THAW

All Exteriors

Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.

Walks 1.0 features the look of quartzite in a through-body porcelain tile. Walks meets the requirements set by the LEED building rating system and may be used to earn the following LEED Credits MR 4.1 and 4.2, EQ 4, SS 7 and EA 1.