Calacatta Michelangelo
Natural Stone Type:
Finish: Polished
Care + Maintenance
- Pre-Grouting Protection: NA
- Initial Cleaning: Deterdek/Fila CR31
- Protection Natural Effect: NA
- Protection Color Enhancing: NA
- Standard Maintenance: Fila Cleaner
- Special Maintenance: Fila PS/87
Applications
- Exterior Cladding: Yes
- Exterior Pavers: No
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: Yes
- Other Countertops: Yes
- Wet Areas: Yes
- Traffic: Yes
Important Information
Abrasion Resistance
High
This material has relatively high abrasion resistance. It rates as a 7 or higher on the Mohs scale. Quartzite or granite typically fall into this range. This material is less likely to scratch than marble, limestone, onyx, slate, etc.
Absorption
Low
This material is virtually non-porous. No sealer is required and it is less likely to stain.
Acid Sensitivity
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
Freeze-Thaw
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use TCNA standards for setting in exteriors and consult an engineer regarding fastening systems and tensile strength required for your project.
