Dover White
Natural Stone Type: MAR
Finish: Polished
Care + Maintenance
- Pre-Grouting Protection: Fila PRW200
- Initial Cleaning: Fila Cleaner
- Protection Natural Effect: Fila MP90
- Protection Color Enhancing: NA
- Standard Maintenance: Fila Cleaner
- Special Maintenance: NA
Applications
- Exterior Cladding: No
- Exterior Pavers: Yes
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: Yes
- Other Countertops: Yes
- Wet Areas: Yes
- Traffic: Yes
Important Information
<p>This material is quarried in the United States and may qualify for LEED MR Credits 5.1 and 5.2. Most marble has naturally occurring cracks and fissures. Expect to see factory repairs. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer.</p>Abrasion Resistance
Low
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
Absorption
Moderate
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
Acid Sensitivity
Moderate
This material is moderately sensitive to acids. Generally, acid etching will be less visible on lighter stones and honed surfaces. The finish will patina over time. If acid etching is a concern, select a minimally sensitive material.
Freeze-Thaw
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use MIA standards for thickness in exteriors and consult an engineer regarding fastening systems and thickness/tensile strength required for your project. This material will patina.
