I Colori

I Colori is a series of glazed porcelain tile, in a spectrum of solid colors, produced in the Lake Como region of northern Italy.

Collections - Featured - I Colori
COLORS, FINISHES & SIZES

Finishes:

  • Matte
  • Gloss (select colors only)
    Sizes – Nominal (and Actual):

  • 1″x1″ (.98″x.98″)
  • 2″x2″ (1.97″x1.97″)
    Mesh-Mounted Mosaics

  • 2″x8″ (1.97″x 7.87″)
  • 4″x12″ (3.93″x11.81″)
  • 4″x24″ (3.93″x23.62″)
  • 8″x24″ (7.87″x23.62″)
  • 2″x9″ (2.36″ x 9.3″)

Trim pieces are also available.

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Exterior Cladding

Select Colors (Bianco, Quarzo, Cotone, Canapa, Azzurro, Fieno, Talco, Salgemma and Navona)

    Suitable for:

  • Interior Walls
  • Interior Floors, including light to medium commercial traffic
  • Exterior Cladding
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.

HAVE A QUESTION?

Get in Touch with a Stone Source Representative.

Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.

I Colori

Collections - Featured - I Colori
COLORS, FINISHES & SIZES

Finishes:

  • Matte
  • Gloss (select colors only)
    Sizes – Nominal (and Actual):

  • 1″x1″ (.98″x.98″)
  • 2″x2″ (1.97″x1.97″)
    Mesh-Mounted Mosaics

  • 2″x8″ (1.97″x 7.87″)
  • 4″x12″ (3.93″x11.81″)
  • 4″x24″ (3.93″x23.62″)
  • 8″x24″ (7.87″x23.62″)
  • 2″x9″ (2.36″ x 9.3″)

Trim pieces are also available.

APPLICATIONS
    Suitable for:

  • Interior Walls
  • Exterior Cladding

Select Colors (Bianco, Quarzo, Cotone, Canapa, Azzurro, Fieno, Talco, Salgemma and Navona)

    Suitable for:

  • Interior Walls
  • Interior Floors, including light to medium commercial traffic
  • Exterior Cladding
INSTALLATION & MAINTENANCE

Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8″ or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.