Pietra Cardosa
Finish: Honed
Material: Slate
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Special Order | Slab | Varies by slab. | 2 CM | Honed |
| Special Order | Slab | Varies by slab. | 3 CM | Honed |
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Fila Cleaner
- Protection Natural Effect: Fila Fob
- Protection Color Enhancing: Fila Stone Plus
- Standard Maintenance: Fila Cleaner
- Special Maintenance: NA
Applications
- Exterior Cladding: Yes
- Exterior Pavers: Yes
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: Yes
- Other Countertops: Yes
- Wet areas: Yes
- Traffic: Heavy Commercial
ABRASION RESISTANCE
Low
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
ABSORPTION
Moderate
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use MIA standards for thickness in exteriors and consult an engineer regarding fastening systems and thickness/tensile strength required for your project. This material will patina.
HAVE A QUESTION?
Get in Touch with a Stone Source Representative.
Have a question? You can reach out directly to your Stone Source Representative or you can contact us here and we’ll have someone get back to you soon.
Pietra Cardosa
Finish: Honed
Material: Slate
| Availability: | Type: | Nominal Size: | Thickness: | Finish: |
|---|---|---|---|---|
| Special Order | Slab | Varies by slab. | 2 CM | Honed |
| Special Order | Slab | Varies by slab. | 3 CM | Honed |
Care + Maintenance
- Pre-Grouting Protection: Not Applicable
- Initial Cleaning: Fila Cleaner
- Protection Natural Effect: Fila Fob
- Protection Color Enhancing: Fila Stone Plus
- Standard Maintenance: Fila Cleaner
- Special Maintenance: NA
Applications
- Exterior Cladding: Yes
- Exterior Pavers: Yes
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: Yes
- Other Countertops: Yes
- Wet areas: Yes
- Traffic: Heavy Commercial
ABRASION RESISTANCE
Low
This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
ABSORPTION
Moderate
This material has a low to moderate absorption rate. Always seal this material prior to use. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
ACID SENSITIVITY
Minimal
This material is minimally sensitive to acids. It will not acid etch or lose its surface sheen when exposed to acidic liquids such as lemons or tomatoes.
FREEZE-THAW
All Exteriors
Due to this material's Minimal or Moderate Absorption rating, its Abrasion Resistance rating, color fastness and tensile strength, this material is suitable for all exterior applications where freeze-thaw cycles are a concern. Use MIA standards for thickness in exteriors and consult an engineer regarding fastening systems and thickness/tensile strength required for your project. This material will patina.